--- 
comments: 
  - 
    comment: i have not tried this yet, but it would be very useful if a comment could be added to these entries outlining what the revision is supposed to fix or add to functionality
    created: 2005-01-24 14:36:30
    name: Graham
  - 
    comment: Does it support varies calleID\'s for HT486
    created: 2005-01-25 00:35:01
    name: lars@pmik.dk
  - 
    comment: I use Danish DTMF and it is working with B&O phones. Futhermore it\'s possible to use a syslog server.
    created: 2005-01-25 16:04:46
    name: diverse@altergratis.dk
  - 
    comment: Grandstream 286 v.1.0.5.23
    created: 2005-01-25 19:47:11
    name: jesperb@gmail.com
  - 
    comment: http://www.grandstream.com/BETATEST/Release_Note_1.0.5.22.doc
    created: 2005-01-26 02:21:54
    name: xad@xbox4fun.com
  - 
    comment: The syslog feature is really cool for debugging. Use kiwisyslog.com
    created: 2005-01-28 16:27:51
    name: jesperb@gmail.com
  - 
    comment: Does support french caller id, but has some registration losses
    created: 2005-02-03 09:41:25
    name: nbougues@axialys.net
  - 
    comment: works just fine with my HT286, for release notes check www.kons.de
    created: 2005-02-04 06:39:39
    name: kons01@gmx.de
  - 
    comment: We are using  \"Use NAT ip\" mode and when network is unaviable during sending of REGISTER  message GS stays unregisterend and doesn\'t attempt to repeat registration
    created: 2005-02-14 09:27:55
    name: admin@ntt.lt
  - 
    comment: I\'ve noticed that, when using outbound proxy, BT100 does not talk firstly to outbound proxy. Instead it just talsk directly to SIp SERVER. Could it be possible??? I say this, because I see my \"Contact\" header with Privat IP.
    created: 2005-02-14 15:58:54
    name: lucas@cyneric.com
  - 
    comment: The 1.0.5.22 on this site is not the same as the 1.0.5.22 on www.grandstream.com/BETATEST
    created: 2005-02-23 23:42:07
    name: tony@softins.co.uk
  - 
    comment: looks like its the same now.
    created: 2005-02-27 10:24:06
    name: jones@secret.no
  - 
    comment: I can not make my Beocom 2100 to show danish caller ID
    created: 2005-03-01 20:07:41
    name: twindata2000@yahoo.dk
  - 
    comment: aint working:(
    created: 2005-03-08 12:12:19
    name: meff
  - 
    comment: I have not been able to get a microsoft PPTP VPN client to connect to my VPN in the office through the HT486.  This firmware doesn\'t address the issue, either.  Anyone else have this problem and a possible fix?
    created: 2005-04-04 18:53:58
    name: Graz
  - 
    comment: .22 is unstable at my place. I looses connection to my IP-provider Rixtelecom.se
    created: 2005-04-06 17:20:53
    name: sm0ihr@gmail.com
  - 
    comment: MS PPTP VPN works for me in 1.0.5.16 by setting \"DMZ IP\" to my PC\'s NATed address (192.168.2.2)
    created: 2005-04-09 00:53:09
    name: Chris
  - 
    comment: using BT 10x, and when I set P48, the outbound proxy, I dont get a register on my sip proxy, when I remove that value for outbound proxy it works. Firmware 1.0.5.22. When io look at my proxy, is basically says unknown char \'[\' anyone have any ideas
    created: 2005-05-10 15:06:19
    name: tomhuntervoip@yahoo.co.uk
note: none
phone: BT100_HT286_HT486
uploaded: 2005-01-24 08:04:04
uploader: ilya.nospam@netbarrage.com
version: 1.0.5.22